Guides

Step-by-step help for you and your team, in plain words.

Importing from SimplePractice

12 min readWorks on:Practice

Who this is for: The practice owner or an admin

Switching from SimplePractice? You can bring your clients, their charts and documents, and your past appointment history into MyoMessenger. The import is self-serve: the practice owner or an admin runs it from Settings > Data Import, and once your files are ready it takes minutes, with no date to book. This guide covers what to export from SimplePractice and how to upload it. If you get stuck, we’re happy to help.

What isn’t imported

  • Balances owed. Add each patient’s balance by hand after your import finishes.
  • Upcoming appointments. Only visits that already happened come in. Book upcoming appointments in MyoMessenger after your import finishes.

What to expect

One import brings in your whole practice. You export the reports once for the practice and one data export for the whole practice, then upload them together in a single import. Before you submit, you match each SimplePractice clinician to a team member in MyoMessenger, and each client goes to the team member their clinician is matched to. If the practice’s export is bigger than 250 GB, export one clinician at a time instead and add every file to the same import. One import holds up to 25 files; a larger practice runs a second import for the rest.

Run Client Details for the whole practice, with all three client statuses and all client types selected. If you see a Clinician filter, select All clinicians. Client Demographics needs no selections. Start the import once your export is ready. The import stays open until you submit it, for up to 7 days after you start it. Within that time, once an export file is added, you can come back to it with Continue this import in the import history. Nothing is matched until you click Start import.

What comes across

  • Clients: name, email, phone, date of birth, address and status. Active, Inactive and Prospective clients keep their status.
  • Guardians for minor clients.
  • Each client’s insurance payer and member ID, from the Client Details report.
  • Charts and notes, as PDFs. Chart notes we can date go to the client’s Clinical notes under their date; any others stay in Documents.
  • Other PDFs and images stored for each client. JPEG and PNG photos go to the client’s Images; HEIC photos and PDFs stay in Documents.
  • Invoice PDFs, which appear on the patient’s Invoices tab.
  • Past appointments, as view-only history: date, time, clinician, location and status (shown, cancelled, late cancel, no-show or clinician cancel).

What doesn’t come across

  • Past payments. Your invoice PDFs still come across, so you keep a record of what was billed.
  • Balances owed and credits. You add each one yourself (see Balances owed below).
  • Other insurance details, such as those in the Appointment Status report.
  • Billing amounts for each visit, and CPT or other billing codes.
  • Future appointments, which SimplePractice can’t export.
  • Word documents, spreadsheets and other file types inside the export; only PDFs and images are imported.

We check every client against the patients already in your account before creating anything. A strong match on email or phone is merged. Anything less certain goes to a review list where you decide, and you can pick which value to keep for each field when you merge. A name and date of birth alone never merge two clients.

Three steps to a successful import

  1. Download the reports.
  2. Export your whole practice’s data.
  3. Complete Migration.

On the Data Import page, choose SimplePractice under “Which system are you importing from?”. The page then shows these same steps, with the place to upload each file inside the step that produces it.

Only the data export is required, but we recommend all four reports: they bring the contact details, guardians, insurance and appointment history that make your records complete. The Client Details report also tells us which clinician each client sees, so without it every client goes to the one team member you choose.

Before you start

  • Before you start: export ALL your clients from SimplePractice, both active and inactive. We need to see at least one inactive client to know no one was left out.
  • No inactive clients, or not sure? In SimplePractice, add a client named Test Inactive and mark them inactive. Then export. You can leave Test Inactive out when you check your clients here.
  • Menu names may differ slightly in your SimplePractice account.
  • Some files download right away; others may take several minutes, depending on their size.
  • We suggest downloading reports as .csv, because Excel can drop the leading zeros from ZIP codes.

Step 1: Download the reports

In SimplePractice, go to Analytics > Reports. Run each report for the whole practice. If a report has a Clinician filter, pick all clinicians, not just one. Then click “manage report” to download it.

  1. Client Details (Clients & Appointments): If you see a Clinician filter, select “all clinicians”. Select all three statuses (Active, Inactive and Prospective), so the report lists every client in the practice. Select “All Client Types”. Click “…more” and toggle on include contacts. Without contacts, guardians’ phone numbers and emails are not imported. Click “Manage report” and “Download CSV”.
  2. Client Demographics (Clients & Appointments): Only on SimplePractice’s Essential and Plus plans; skip it if it is not in your menu. No selections required. Simply click “Manage report” and “Download CSV”.
  3. Appointment Status (Clients & Appointments): Set the date range from the earliest date to today and click “Apply”. Select “All clients” and “All”. If you see a Clinician filter, select “All clinicians”. When you click “Manage reports”, you have the option to toggle on “include insurance and include documentation”. Click “Download CSV”.
  4. Attendance (Clients & Appointments): Set the date range from the earliest date to today and click “Apply”. Select “All clients”, “All locations” and “All statuses”. If you see a Clinician filter, select “All clinicians”. Click “Manage report” and “Download CSV”.

The Appointment Status report covers past appointments only. SimplePractice can’t export future appointments, so they are not part of the import. The Attendance report adds each visit’s location and status. Imported appointments are view-only history on the patient’s record: they send no reminders, touch no billing, and don’t change session numbers.

Reports can be .csv or Excel (.xlsx) files. Older Excel (.xls) files are not accepted. On the Data Import page, add them in this step, up to one file of each. If asked, choose which report each file is.

Step 2: Export your whole practice’s data

The data export holds each client’s chart, notes and stored documents, along with their basic details. One export of the whole practice is best. In SimplePractice, go to Settings > Practice > Data export, then:

  1. Click “start export”.
  2. Choose “All clients in the practice”
  3. Click “Complete” and check “Include separated data”
  4. When the export is ready, download it.

After the download is complete, check the file size. If the file is larger than 250 GB (which is the most we can take in one file), export one clinician at a time instead: choose “all clients for one clinician”, pick the clinician, and repeat for each clinician. Add every file to the same import.

The export must be a .zip file; a password-protected zip is optional. On the Data Import page, drag the export .zip into the Export file box, or click to choose it, and enter the password if the zip has one. Exporting one clinician at a time? Click Add another file and add the next one; each file uploads while you add the next.

Step 3: Complete Migration

Upload your export file and click "Next: match clinicians" below. Match each SimplePractice clinician to a team member, then click "Start import". Keep this tab open until the upload finishes.

When you click Next: match clinicians, we send your files, read your reports and list every clinician they name. Pick the MyoMessenger team member each clinician is, or choose Not in MyoMessenger for someone who won’t use MyoMessenger. When a name matches a team member exactly, we pick that person for you to check. Then choose who should get clients we can’t match to a team member, and click Start import.

Add every file to this same import, not a new one. The import stays open until you submit it, for up to 7 days after you start it. Within that time, once an export file is added, you can come back to it with Continue this import in the import history. Nothing is matched until you click Start import. An interrupted upload can be resumed with Resume on the export file while the import is open.

When processing finishes, open the review list to decide on any clients we couldn’t match with certainty.

Keeping your records clean during an import

Most of the time, you can keep using MyoMessenger while your import runs. There are two short windows when it helps to pause.

1. While your files are being processed (after you upload, until the review screen opens)

  • Don't add new patients who might also be in your SimplePractice files. Add them after the import, or the import may ask you whether they're the same person.
  • Don't merge, archive or rename patients who are in your files.

2. If you ask us to undo an import

We'll tell you before we start and when we're done. It usually takes a few minutes. While it runs, please don't:

  • edit, archive or reactivate any patient who came in with that import;
  • add or remove guardians for those patients;
  • send portal invites to those patients or their guardians;
  • take payments, refunds or new plans for those patients.

If something can't wait, go ahead. Nothing will be lost, but we may list that patient for you to check by hand afterwards.

After an import is undone, it can't be restarted. To import again, upload your files again as a new import.

Insurance and billing data

Each client’s insurance payer and member ID are imported from the Client Details report. Other insurance details and billing amounts in the reports are not imported.

Past payments and balances owed are not imported, so nothing recorded in SimplePractice is charged or counted twice. Your invoice PDFs from the export do come across, onto the patient’s Invoices tab, so you keep a record of what was billed.

Balances owed

The import doesn’t bring in what patients still owe you. You add each one yourself as a treatment plan, one patient at a time, as shown below.

Before you close your SimplePractice account, download these two reports from Analytics, then Reports. Each can be downloaded as CSV or Excel.

  1. Outstanding Balances: what each client still owes. Click "Outstanding Balances". Set the date range from the earliest date to today and click "Apply". Click "...More" and select "With Balance", "Show Details", "Include Insurance". Click "Manage report" and "Download CSV".
  2. Client Balance Aging: how long each balance has been overdue.

Keep these files somewhere secure: they contain patient information.

Add each balance yourself

Work down the Outstanding Balances report. For each patient who still owes you:

  1. Open the patient in MyoMessenger and go to the Payments tab.
  2. Check Transactions first. If a balance from your old software is already there, don’t add it again, or the patient will owe it twice.
  3. Go to the Treatment Plans tab and choose Create New Plan.
  4. For the course price, enter what the whole course costs.
  5. Under Already paid, enter what they’ve paid so far. What’s left is what they still owe. No card is charged.
  6. Under Covers these appointment types, choose at least one kind of visit. The plan can’t be created without one.
  7. Choose Create plan to save it.

Collect what’s left like any other charge with Collect Payment. You need permission to collect payments to create a treatment plan.

Uploading your files securely

Upload your files inside MyoMessenger, never by email. Only the practice owner or an admin can open Settings > Data Import.

Getting started

Questions about your import, or want a hand with it? Contact us and we’ll help you get set up.

This guide is based on our experience and on SimplePractice’s own help articles, and menus and options can change. For questions about the data SimplePractice holds or exports, contact SimplePractice.

Was this guide helpful?

Still stuck? Contact us and we’ll help you out.

Last updated November 19, 2026